| Qtn: |
Part: |
|
| 1 |
T1-4 tapping machine w/ electric 110V drive unit.
Drive motor 110V, Back plate w/ spacers for T1A Drive motor, Chuck wrench for securing boring
bar, GFI electrical protection relay , Packing adaptor housing, Packing assembly, O-rings
standard temperatures, Feed Screw assembly, |
| 1 |
18” D-Boring bar for 3/4” – 1 1/4” taps |
| 1 |
18” P-Boring bar for 1 1/2” – 2” taps |
| 1 |
24” P-Boring bar for 2 1/2” – 3” taps |
| 1 |
30” P-Boring bar for 3” – 4” taps |
| 2 |
3/8" Spare retention pilot drill w/wire for P style boring bar |
| 2 |
1/4” Spare retention pilot drill w/wire for D style boring bar |
| 1 |
1” x 3/4” Bell reducer and close nipple for 3/4” taps |
| 1 |
1” Iron Pipe sub adaptor |
| 1 |
1 1/2” IP sub adaptor |
| 1 |
1 1/2” IP x 1 1/4” Bell Reducer & Nipple for 1 1/4” taps |
| 1 |
2” IP Sub adaptor |
| 1 |
2 1/2” IP sub adapter |
| 1 |
3” IP Sub adapter |
| 1 |
4” Flanged sub adapter will bolt-up to 4” Mechanical joint valves also. |
| 1 |
11/16” High Speed holesaw |
| 1 |
7/8” High Speed holesaw |
| 1 |
1 1/8” High Speed holesaw |
| 1 |
1 3/8” High Speed holesaw |
| 1 |
1 7/8” High Speed holesaw |
| 1 |
2 3/8” High Speed holesaw |
| 1 |
2 7/8” High Speed holesaw |
| 1 |
3 1/2” High Speed holesaw |
| 3 |
Retention wire for D - style drills. |
| 3 |
Retention wire for P - style drills. |
| 1 |
Owners manual |
| 1 |
Storage box |
| Total |
$5,650.00 + Insurance + Handling + Shipping |
| Complete Package |
|
| Not necessary to purchase complete kits, Feel free to purchase only what you need for the job. |
| D - boring bar allow small cutters screw directly on. A 1/4" retention style pilot drill is supplied with each D boring bar in this package. P– Each boring bar has a Cutter mandrel and retaining pilot drill. A 3/8" retention style pilot drill is supplied with each P boring bar in this package. |
 |
Click to see picture of a complete package. |
|
