Call us toll free: 1-800-279-5659
The T1-A Tapping machine consists of a 3-rail frame in which the drive unit slides and operates off a 3/4 Horsepower Cleco Air Motor, requiring 90 - 100 PSI air pressure through a minimum 3/8" I.D. hose to create a spindle speed of 225 RPM. Behind the drive motor, the feed assembly slides and locks into place. The packing housing, consisting of 3 O-rings, at the opposite end of the feed assembly, seals around different length boring bars, depending on the travel needed to complete the tap. Different size adaptors screw on to the machine which are sealed by an existing O-ring for convenient size changes. Designed by Tappers for Tappers
Operating max pressure 300 PSI. @ 100 F. (STD. Packing)
Operating temperature 250 F. @ 250 PSI.
(optional) High temperature kit 495 Deg. F. @ 200 PSI., copper flared
Don't be fooled by cheap imitations, we are the original manufacturer of the T1 series tapping machine!
Others have copied this machine with claims that it can perform 5” and 6” hot taps. From our 37+ years of development and field experience, performing 5” and 6” taps are possible, but the liabilities of injury, lost coupons, and costly problems do not allow us to offer this.
2LBin is committed to only professional, safe, and dependable tools. If you are still set on buying those 6” versions, we suggest you ask for a written guarantee from the manufacturer that they stand behind the use of these on 6” taps.
|1||T1Airdrive tapping machine, air-drive motor, back plate w/ spacers for T1 air-drive drive motor, chuck wrench for securing boring bar, GFI electrical protection relay, packing adaptor housing, packing assembly, O-rings for standard temperatures, feed screw assembly|
|1||18" D-Boring bar for 3/4" - 1 1/4" taps|
|1||18" P-Boring bar for 1 1/2" - 2" taps|
|1||24" P-Boring bar for 2 1/2" - 3" taps|
|1||30" P-Boring bar for 3" - 4" taps|
|2||3/8" Spare retention pilot drill w/wire for P style boring bar|
|2||1/4" Spare retention pilot drill w/wire for D style boring bar|
|1||1" Iron Pipe sub adaptor|
|1||1 1/2" IP sub adaptor|
|1||2" IP Sub adaptor|
|1||2 1/2" IP sub adaptor|
|1||3" IP Sub adaptor|
|1||4" Flanged sub adaptor will bolt-up to 4" Mechanical joint valves also.|
|1||11/16" Bi-Metal holesaw|
|1||7/8" Bi-Metal holesaw|
|1||1 1/8" Bi-Metal holesaw|
|1||1 3/8" Bi-Metal holesaw|
|1||1 7/8" Bi-Metal holesaw|
|1||2 3/8" Bi-Metal holesaw|
|1||2 7/8" Bi-Metal holesaw|
|1||3 1/2" Bi-Metal holesaw|
|3||Retention wire for D - style drills.|
|3||Retention wire for P - style drills.|
Not necessary to purchase complete kits. Feel free to purchase only what you need for the job. Call 1-800-279-5659 and let us assist you with your order today. D-Boring bar allows for small cutters to screw directly on. A 1/4" retention style pilot drill is supplied with each D-boring bar in this package.
P-Boring bar has a cutter mandrel and retaining pilot drill. A 3/8" retention style pilot drill is supplied with each P boring bar in this package.
* Storage box is for shipping purposes only! Not responsible for damages to the steel box during shipping!
2LBin can shorten the lengths of the Drive Rails, Feed Screw, and Boring Bars of our machine to match issues that may arise with jobs in tight locations where the application is needed.
This Tapping Machine Taps:
High Pressure Line Contents