Call us toll free: 1-800-279-5659
The Pipe Freezing Kit eliminates the need to drain systems and shut down operating equipment when making pipe repairs. The kit uses liquid carbon dioxide to create ice plugs in sections of pipes. Kits are supplied with three freezing jackets for pipes 1/2"-4" (13-77mm) O.D and two 20' hoses.
To operate, turn off the pipe flow and attach a freezing jacket to the pipe upstream from the section needed to be repaired. Fill the freezing jacket with CO2 and an ice plug will form. After completing whatever work is needed, remove the jacket and the ice plug will defrost.
The Kit can be used for pipes 1/2"-4" (13-77mm) O.D. and includes three freezing jackets, two 20' (6.1m) hi-pressure hoses, and a T-connector.
Pipe freeze plugging is a simple, cost-effective method to perform pipe maintenance or line modifications without shutting down your plant processes. Using liquid carbon dioxide (CO2) you can isolate the problem area in the line with SOLID freeze plugs of the fluid within the line. This allows the job to be done with no drain-down or refill, no loss of expensive process fluids, and no system downtime. Once the work is completed, the plugs are thawed and the line is back in operation. Standard freeze plugs range in size from 1/2" to 3" (13-77mm) O.D.
1 unit of 20" (6.1m) High Pressure Hoses with custom nozzle
1 unit of small Jacket for pipes 1/2" - 1" (13-25 mm) O.D.
1 unit of medium Jacket for pipes 1" - 1 1/2" (25-38 mm) O.D.
1 unit of large Jacket for pipes 2" - 4" (38-114 mm) O.D.
1 Tee connectors
2 Pair Safety Glasses
2 Pair of Insulated Gloves
1 Carrying bag & Instructions for use